CLD1 Induction Loop Driver (USXX) - 120V AC PSU
Model: CLD001USXX
- Low lifetime cost
- Very compact
- Choice of microphone and pre-formed loop in counter kit
- 2 independent inputs featuring 1 mic input and 1 switchable mic/line input
- Metal loss compensation
The CLD1 Compact Loop Driver is designed for counter systems and small area perimeter loop systems. Measuring only 128 x 74 x 35mm and with an output current of 2.4Arms, the CLD1 is the smallest and highest performance amplifier in it’s class. Designed and built to Ampetronic’s high standards of reliability, backed with a 5 year warranty and Ampetronic support, the CLD1 offers certainty of performance and the lowest lifetime cost available.
Audio quality is ensured with metal loss correction (MLC) combined with Ampetronic’s usual high standards of design. The CLD1 is designed for flexibility and convenience, featuring 2 separate microphone inputs with independent level controls, one of which can be configured as a line input. All cable connections are made on a single face of the unit, adding flexibility and further simplifying installation.
- Low lifetime cost
- Very compact
- Choice of microphone and pre-formed loop in counter kit
- 2 independent inputs featuring 1 mic input and 1 switchable mic/line input
- Metal loss compensation
- All connections to a single face for installation convenience
- 12V DC or external AC power pack supplied as standard. CLD1-AC has integral power supply
- Free technical support
- Application:
- Ticket and service counters
- Retail counters
- Information kiosks
- Reception desks
- Interview rooms
- Small meeting rooms
- Taxis and private cars
- Package Includes:
- System only
- Warranty - Yes
- Spec Sheet available - Yes
- Cooling: Natural convection
- Depth: 2.91 in
- Frequency Response: 80Hz to 6.3kHz ±1.5dB
- Height: 1.38 in
- Width: 5.04 in
- DC Voltage: 12 Volts
- Automatic Gain Control: AGC optimised for speech, Dynamic range [gt]36dB, Green LED indicator on front panel
- Input 1: Microphone input, Suitable for unbalanced electret microphone, 3.5mm mono jack socket, Input impedance 8kOHMS, 6v bias via 10kOHMS source, Sensitivity -60dBu for max output, Overload level -14dBu, Recessed control on front panel
- Input 2: Switchable line/microphone, Recessed switch on connector panel, Microphone as for input 1, Line input: Input impedance 820kOHMS, Sensitivity -20dBu for max output, Overload: [gt]+20dBu
- Product Weight: 0.62 lbs
- Mounting: Horizontal or vertical panel or wall mount, with 2 screw fixings
- Sustainability Rating: IP20
- Warranty (Length/Type): 5 Years
- Certifications: CE, EMC
- Wireless: No
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): -4 F
- Current Draw: 1 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Metal Loss Correction: 0 to 4.5dB/octave, Recessed control on front panel
- Loop Resistance: 0.3OHMS to 1.0OHMS resistive or [lt]1.3OHMS maximum reactive impedance
- Drive voltage: [gt]3.2Vrms [gt]4.5Vpk at maximum output current
- Drive current: 2.4Arms 3.4Apk continuous 1kHz sine wave, Short term peak [gt]4.8Apk, LED indicator on front panel
- Loop connector: Vibration proof clamps, accept 0.5 to 1.3mm2
AV Structural, Inc.
1190 Burnett Ave
Ste B
Concord, CA 94520
USA
(415) 386-8086
http://www.avstructural.com