1-Channel DSP Perimeter Driver, Dante

Model: C5-1D US

Ampetronic has engineered the C Series to offer the high end performance, consistency and certainty of results usually associated with top of the range hearing loop drivers.
Class ‘D’ drivers built into the C Series ensures low running and maintenance costs.
Network and Dante versions enable installers, technicians and facilities managers to remotely control the driver and monitor its condition status along with resistance and induction measurements.
Fault condition alerts via email or Telnet provide reassurance that an operator will be informed of any issues with performance delivery.
The C5-1 features 5 AmpsRMS current loop output, plus ample voltage headroom, making it suitable for a wide range of applications. Installation can be performed with total confidence; unique, multi-stage filtering ensures compatibility with other system

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The C5-1 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology. C Series units feature digital signal processing and networking functionality, and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.

Ampetronic has engineered the C Series to offer the high end performance, consistency and certainty of results usually associated with top of the range hearing loop drivers.
Class ‘D’ drivers built into the C Series ensures low running and maintenance costs.
Network and Dante versions enable installers, technicians and facilities managers to remotely control the driver and monitor its condition status along with resistance and induction measurements.
Fault condition alerts via email or Telnet provide reassurance that an operator will be informed of any issues with performance delivery.
The C5-1 features 5 AmpsRMS current loop output, plus ample voltage headroom, making it suitable for a wide range of applications. Installation can be performed with total confidence; unique, multi-stage filtering ensures compatibility with other system
These products are designed to form part of a system that can meet all of the requirements of the international loop performance standard IEC60118-4, and the relevant parts of IEC TR 63079.
Application:
Lecture Theatres and Conference facilities
Stadia, Sports Halls, Cinemas and Theatres
Courts Rooms, Airports and Railway Stations

Dante Enabled - Yes
Warranty - Yes
Wireless Receiver Transmission - Loop
Spec Sheet available - Yes

Cooling: Passive
Depth: 7.48 in
Distortion: THD+N [lt]0.3% 1kHz sine at full current
Frequency Response: 80Hz to 6.5kHz
Height: 1.73 in
Width: 16.93 in
USB: Firmware updates or power for wireless router (200mA max)
Line Output: 3 way 3.5mm euroblock screw terminal (supplied) post AGC balanced output
DC Output: 2 way 3.5mm euroblock screw terminal Re-settable, fuse protected 12V 0.1A
Automatic Gain Control: The AGC is optimised for speech. Dynamic range [gt]36dB
STATUS: Tri-colour LED: Solid GREEN = normal operation, Flashing GREEN = sleep or standby mode, Flashing RED = error, Flashing AMBER = firmware updating
Mounting: Freestanding, 1U 19 inch rack mount (requires additional rack tray), Wall mounting (requires additional brackets)
Sustainability Rating: IP20
Warranty (Length/Type): 5 Years
Operating Temperature (Maximum): 95 F
Operating Temperature (Minimum): 32 F
Metal Loss Correction: Corrects system frequency response issues due to metal structures in a building. Gain constant at 1kHz, adjustable gain slope from 0 to 4dB per octave in 0.25dB increments. Custom 2 slope MLC allows different slopes and transition frequency to be set via the menu (network models only). This does not compensate for signal loss from metal structures which can be significant
Input 1 and 2: 3 way 3.5mm euroblock screw terminal input (supplied) with a balanced microphone and line level operation, selectable via rear panel switch
Microphone /line): Microphone specification; 200 to 600ohms, sensitivity -67dBu. Selectable 24V phantom power on microphone only Line sensitivity -42dBu. Max line level 17Bu. Max mic level -8dBu.
100V Line (Input 2 only): 2 way 5mm euroblock screw terminal (supplied) sensitivity +7dBu
Loop Connectors: 4 way 5mm euroblock screw terminal (supplied) for each output, for star-quad configured feed cables
Dante(Optional C5/C7): RJ45 Ethernet, control and monitoring. Hosted web server, Telnet and SNMP
Number of Channels: 1
Active Power: 35 Watt
Current Draw: 5 Amps
Product Weight: 5.51 lbs

Loop Driver 849524 kb - Data Sheet

Project List

Loop Driver 724831 kb - Other

Project List