The C2N-SDC-DC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling 24 Volt DC motorized shades and drapes. The C2N-SDC-DC is a Cresnet device with two independently controlled 24V DC outputs, each designed to provide standard up/down or open/close control of a conventional two-wire bidirectional type motor. The C2N-SDC-DC mounts in the wall or ceiling using an off-the-shelf 4" square or 2-gang electrical box. Pushbuttons on the front of the unit allow for manual operation of the motors during installation and setup.
Controls two 24 VDC shade or drape motors individually or simultaneously (30 W maximum)
The C2N-SDC-DC mounts on a standard 2-gang or 4-inch square electrical box
Four manual pushbutton controls are provided on the faceplate
Spec Sheet available - Yes
Width:
4.10 in (10.42 cm)
Height:
4.10 in (10.42 cm)
Depth:
1.16 in (2.95 cm)
Operating Temperature (Maximum):
122 F
Operating Temperature (Minimum):
41 F
Product Weight:
0.55 lbs
Motor Control Channels:
2
Load Ratings Per Channel:
30 W (1.25 Amps) at 24 Volts DC)
Total Load Ratings:
30 W (1.25 Amps) at 24 Volts DC)
Load Type:
2-Wire 24V DC bidirectional motors, Somfy LT28B or similar
Power Requirement Cresnet Power Usage:
Up to 33 W (1.38 Amps at 24 Volts DC)
We are open and operating as we are considered an Essential Service under Telecommunications Systems here in the state of California. We are committed to providing our customers with the respect they and their customers deserve by adhering to the safest hygiene protocols and/or mandates published by the CDC as well as other nationally recognized Public Health institutions in order to protect them and our workers on all worksites. AV Structural will be providing all onsite staff with ample and proper Personal Protective Equipment (PPE).
