The C2N-RTHS is a wall-mounted temperature and relative humidity sensor that communicates directly with any 2-Series control system via the Cresnet control network. One-piece mounting makes the C2N-RTHS simple to install. The 1-1/2 inch diameter face protrudes just 1/8 inch from the wall surface and is easily painted or wallpapered to blend into the wall surface.
Spec Sheet available - Yes
Connection:
~10 inch (~25.40 cm) 4-wire pigtail; Connects to Cresnet control network
Buttons and LEDs - SETUP:
Used for Touch-Settable ID (TSID)
Temperature:
-40 to 80 Degree C -40 to 176 Degree F
Humidity:
0 to 100 % RH
Output Resolution:
0.1 degree F (0.1 degree C); 1% RH
Accuracy:
±1.0 degree F (0.5 degree C); 5% RH
Power Requirements - Cresnet Power Factor:
0.25 Watts (0.01 Amps @ 24 Volts DC)
Enclosure:
Cylindrical plastic, drywall mountable in a 1 inch (2.54 cm) hole; Protrudes ~1/8 inch (0.32 cm) from wall surface; Primed metal cap suitable for paint or wallpaper
We are open and operating as we are considered an Essential Service under Telecommunications Systems here in the state of California. We are committed to providing our customers with the respect they and their customers deserve by adhering to the safest hygiene protocols and/or mandates published by the CDC as well as other nationally recognized Public Health institutions in order to protect them and our workers on all worksites. AV Structural will be providing all onsite staff with ample and proper Personal Protective Equipment (PPE).
