X Series Media Presentation Amplifier

Series: X

Model: AMP-X50MP

Part #: 6511106

Compact and versatile power amplifier
2 x 25 W per channel (1 x 50 W) into 4 or 8 Ohm speakers
1 x 50 W output for Hi-Z (70 V and 100 V) speakers
Balanced, unbalanced and stereo 3.5 mm inputs with auto summing
Stereo or mono-summed operation

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Videos

The Crestron® AMP-X50MP is a low-cost audio amplifier solution that is suitable for a variety of applications. It features a compact, surface-mountable design that installs virtually anywhere without requiring an equipment rack.

Compact and versatile power amplifier
2 x 25 W per channel (1 x 50 W) into 4 or 8 Ohm speakers
1 x 50 W output for Hi-Z (70 V and 100 V) speakers
Balanced, unbalanced and stereo 3.5 mm inputs with auto summing
Stereo or mono-summed operation
Remote power control
Energy saving design reduces power consumption when idle
Highly sensitive audio-sensing circuitry with high-speed wake time
Convection cooled for noiseless operation
Volume, bass and treble adjustments
Captive speaker and power connectors for secure and robust connectivity
Electronic short-circuit and overload protection
Factory installed surface mount flange brackets are removable and reversible
Quarter-Rack width for rack mounting with optional kit
60 W DC power supply with locking barrel connector and DC cable included

Amplifier Type - Standard Amplifier
Energy Star rated - Yes
Low Voltage Control - Yes
Rackmountable - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 41 F
Mounting Width: 0.25 in
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Certifications: UL
Impedance: 8 ohm
Number of Channels: 2
Sensitivity: 4 dB
Signal to Noise Ratio: 90 dB
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 14.60 Watt
Current Draw: 2.50 Amps
DC Voltage: 24 Volts
Standby Power: 6 Watt
Depth: 6.99 in
Height: 1.74 in
Width: 4.33 in
Product Weight: 3.24 lbs
Regulatory Compliance: ErP (1275/2008/EC), UL 62368, UL 2043, FCC Class B commercial and residential use
Warranty (Length/Type): Limited
Audio:
•Input Signal Types: Balanced or unbalanced analog line-level
•THD+N: <0.1% at 1 kHz @ -3 dB full rated output power
•Crosstalk: -75 dB at 1 kHz
•Input Sensitivity: 1.23 Vrms, +4 dBu balanced; 0.316 Vrms, -10 dBV unbalanced; For 25 W @ 8 Ohms, 50 W @ 70 V/100 V
•Gain: 21.5 dB @ 8 Ohms, Balanced
•Protection: Clip limiter, over current, under voltage, over temperature, DC offset, extreme high frequency
•Wake Signal Threshold: -57 dBu (1 mV) max
Connectors:
•Speaker Output: (1) 6-pin, 5.08 mm pitch, 12 A plug with screw locking retainers; Power amplifier outputs; Wire Size: Terminals accept up to 12 AWG (3.31 mm2)
•ALS OUT:(1) 3.5 mm connector, female; Unbalanced line level audio outputs; Maximum Output Level: 2.24 Vrms, +7 dBV (+9.2 dBu); Fixed audio output for assisted listening devices duplicates the summed audio input
•AUDIO IN 1-2 (UNBALANCED): (2) RCA connectors, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu)
•AUDIO IN 1-2 (UNBALANCED): (1) 3.5 mm connector, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu)
•AUDIO IN 1-2 (BALANCED): (1) 5 pin 3.5 mm detachable terminal block; Balanced line level audio inputs; Maximum Input Level: 7.75 Vrms, +20 dBu; Input Impedance: 20k Ohms
•REMOTE: (1) 2 pin 3.5 mm detachable terminal block; Connect to contact closure to place amplifier in standby mode.
•G: (1) M3 with captivated internal tooth lock washer screw; Chassis ground lug
Controls & Indicators:
•PWR: (1) Bi-color white/red LED; White indicates operating power supplied; Red indicates standby mode.
•FAULT: (1) Red LED; Indicates an over temperature or over current fault
•SIGNAL: (1) Bi-color white/red LED; White indicates input signal presence; Red indicates input signal clipping/limiting
•Hi-Z: (1) White LED; Indicates speaker output is in Hi-Z (70 V/100 V) mode
•MONO/STEREO: (1) Slide switch to select STEREO, MONO; STEREO preserves channels; MONO creates a mono downmix of the input signals
•HiZ/LoZ: (1) Slide switch to select LoZ (low impedance 4-8 ohms) or Hi-Z (high impedance 70 V/100 V)
•VOLUME, BASS, TREBLE: (3) Rotary knobs adjust volume, bass (+/- 6 dB) and treble (+/- 6 dB) levels
Environmental:
•Humidity:10% to 90% RH (non-condensing)
Construction:
•Chassis: Metal, convection cooled (fanless)
•Front Panel: Metal, black finish with polycarbonate label overlay
•Mounting: Freestanding, surface mount or 1/2 width 1 RU 19 in. rack mountable; Gangable with other Crestron modular and X series products (adhesive feet and surface mounting brackets included); Ganging kit and rack mounting kit optional

AMP-2210HT - 2x210W Commercial Power Amplifier, 4/8 ohm or High-Power 70V

AMP-2210T - 2x210W Commercial Power Amplifier, 4/8 ohm or 70/100V

AMP-3210S - 3x210W Commercial Power Amplifier, 4/8 ohm

AMP-3210T - 3x210W Commercial Power Amplifier, 4/8 ohm or 70/100V

AMP-4600 - 4-channel Power Amplifier, 600W/channel

AMP-8075 - 8-channel 75W Power Amplifier

AMP-8150 - 8-channel 150W Power Amplifier

AMP-X300 - 4-channel Amplifier, 75W/channel

AMPI-8075 - 8-channel 75W/100V Commercial Power Amplifier with 4/8-ohm Impedance

AMPI-8150 - 8-channel 150W/100V Commercial Power Amplifier with 4/8-ohm Impedance

AUD-EXT-100 - Audio over CAT5 Extender for One Unbalanced Stereo Signal

CBL-RCA2-12 - Crestron® Certified RCA Stereo Audio Interface Cable, 12 ft

CBL-RCA2-6 - Crestron® Certified RCA Stereo Audio Interface Cable, 6 ft

Presentation Amplifier 2276727 kb - Data Sheet

Project List

Crestron Audio Solutions, Now & Next

Project List