The VPSI-1 device is designed to allow third party microphones and LED indicators to interface as slave devices to the Vocia standard and emergency Wall Station and standard Desk Station (WS-4/10, EWS-4/10 and DS-4/10) series microphones and to the Vocia Input 6 (VI-6) device for paging via the Paging Ports. Up to four VPSI-1 interfaces can be connected per VI-6 when configured for Vocia Auxiliary Microphone mode. The VPSI-1 can also facilitate third party microphones and control system interfacing with Vocia Wall and Desk Stations (WS-4/10 and DS-4/10). The host Paging Station must be configured for 'Remote control' mode within the software.
Slave interface to Vocia Paging Stations
and VI-6 device
Visual feedback of Paging and Zone status
Suitable for surface mounting
Audio, Power and Control over a single
Ethernet cable
Spec Sheet available - Yes
INPUT:
Frequency Response (20Hz to 10kHz): +0, -1dB
Nominal Level (Hardware Configurable): 0dBu, -10dBu, -40dBu and -50dBu
THD + N (20Hz to 10kHz): <0.08%
Effective Input Headroom: 25dB
LED Driver Mode Used for VI-6 and Paging Stations:
LED Output Voltage: 15mA
RS-232 Connection settings-Only used for Paging Stations:
Baud Rate: 57600 bps
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Host Connection:
RJ45 with shielded Ethernet cable (CAT5, CAT5e, CAT6, or CAT 7)
Compliance:
RoHS Directive
EU Directive 2002/95/EC
We are open and operating as we are considered an Essential Service under Telecommunications Systems here in the state of California. We are committed to providing our customers with the respect they and their customers deserve by adhering to the safest hygiene protocols and/or mandates published by the CDC as well as other nationally recognized Public Health institutions in order to protect them and our workers on all worksites. AV Structural will be providing all onsite staff with ample and proper Personal Protective Equipment (PPE).
